UDMA_GC Peripheral Access Layer

Content
	UDMA_GC Register Masks
	PMU_CTRL Peripheral Access Layer

Data Structures
struct	UDMA_GC_Type

Macros
#define	hyperbus(id)
#define	uart(id)
#define	i2c(id)
#define	dmacpy(id)
#define	i2s(id)
#define	cpi(id)
#define	soc_ctrl
#define	SOC_CTRL_BASE

Description

Macro Definition Documentation

#define cpi

(

id

)

Referenced by cpi_cfg_filter_get(), cpi_cfg_filter_set(), cpi_cfg_glob_get(), cpi_cfg_glob_set(), cpi_cfg_ll_get(), cpi_cfg_ll_set(), cpi_cfg_size_get(), cpi_cfg_size_set(), cpi_cfg_ur_get(), cpi_cfg_ur_set(), and cpi_udma_channel_set().

#define dmacpy

(

id

)

Referenced by __pi_dmacpy_copy_exec(), __pi_dmacpy_open(), dmacpy_dst_addr_get(), dmacpy_dst_addr_set(), dmacpy_mem_sel_get(), dmacpy_mem_sel_set(), dmacpy_src_addr_get(), dmacpy_src_addr_set(), and dmacpy_udma_channel_set().

#define hyperbus

(

id

)

Referenced by hyper_ext_addr_get(), hyper_ext_addr_set(), hyper_mem_cfg0_get(), hyper_mem_cfg0_set(), hyper_mem_cfg1_get(), hyper_mem_cfg1_set(), hyper_mem_cfg2_get(), hyper_mem_cfg2_set(), hyper_mem_cfg3_get(), hyper_mem_cfg3_set(), hyper_mem_cfg4_get(), hyper_mem_cfg4_set(), hyper_mem_cfg5_get(), hyper_mem_cfg5_set(), hyper_mem_cfg6_get(), hyper_mem_cfg6_set(), hyper_mem_cfg7_get(), hyper_mem_cfg7_set(), and hyper_udma_channel_set().

#define i2c

(

id

)

Referenced by i2c_setup_get(), i2c_setup_set(), i2c_status_get(), i2c_status_set(), and i2c_udma_channel_set().

#define i2s

(

id

)

Referenced by __pi_i2s_resume(), i2s_cfg_clkgen0_get(), i2s_cfg_clkgen0_set(), i2s_cfg_clkgen1_get(), i2s_cfg_clkgen1_set(), i2s_chmode_get(), i2s_chmode_set(), i2s_ext_clk_get(), i2s_ext_clk_set(), i2s_filt_ch0_get(), i2s_filt_ch0_set(), i2s_filt_ch1_get(), i2s_filt_ch1_set(), i2s_udma_channel_set(), and i2s_udma_clear().

#define soc_ctrl

#define SOC_CTRL_BASE

Peripheral SOC_CTRL base address

#define uart

(

id

)

Referenced by __pi_uart_conf_set(), __pi_uart_freq_cb(), __pi_uart_open(), __pi_uart_rx_abort(), __pi_uart_tx_abort(), hal_uart_rx_clear(), hal_uart_tx_clear(), uart_setup_get(), uart_setup_set(), uart_status_get(), and uart_udma_channel_set().